Vaisala XMP10 Series Compact Humidity and Temperature Probes
Miniature humidity and temperature probes for rack inlets, enclosures and tight spaces. Up to ±1 %RH and ±0.1 °C, Modbus RTU or voltage outputs, M8 connector, IP65 metal or plastic body. Works stand-alone, with Origo10 or daisy-chained on Indigo520 Supervisor.
Description
XMP10 packs a full humidity and temperature transmitter into a 12 mm probe. Use it as a stand-alone sensor on Modbus RTU or analog voltage, as the plug-in probe of an Origo10 transmitter, or daisy-chain dozens of them on an Indigo520 Supervisor for rack-by-rack data-hall monitoring.
Key features
- Five accuracy grades from ±1.0 %RH (XMP10A) to ±3.0 %RH (XMP10I); XMP10T temperature-only
- HUMICAP® 180R, HUMICAP® 180V (catalytic) or INTERCAP® sensor
- Modbus® RTU (RS-485) or 2-channel voltage outputs; 4 … 20 mA via loop-power converter
- Outputs RH, T, dew/frost point, wet bulb, absolute humidity, mixing ratio, enthalpy
- Standard M8 connector; IP65 stainless-steel or plastic body
- Very low power: typical 3.5 mW
Models
| XMP10A | RH+T, ±1.0 %RH, HUMICAP® 180R |
|---|---|
| XMP10R | RH+T, ±1.5 %RH, HUMICAP® 180R |
| XMP10B | RH+T, ±2.0 %RH, HUMICAP® 180R |
| XMP10I | RH+T, ±3.0 %RH, INTERCAP® |
| XMP10C | RH+T, ±1.5 %RH, HUMICAP® 180V catalytic |
| XMP10T | Temperature only, Pt1000 |
Riajati supplies Vaisala instruments in Malaysia — send us your measurement points, required outputs and quantities through the Enquiry tab for a quotation.
| Relative humidity | |
|---|---|
| Measurement range | 0 … 100 %RH |
| Factory calibration uncertainty | ±1.1 %RH (0 … 90 %RH), ±1.8 %RH (90 … 100 %RH) |
| Stability | < 0.5 %RH/year in optimal conditions |
| Response time | T63 12 s, T90 27 s |
| Temperature | |
| Measurement range | −40 … +80 °C (metal body), −40 … +60 °C (plastic body / INTERCAP®) |
| Accuracy, digital output | ±0.1 °C at +15 … +25 °C |
| Accuracy, analog output | ±0.2 °C at 0 … +40 °C |
| Sensor | Pt1000 RTD Class F0.1, IEC 60751 |
| Inputs and outputs | |
| Operating voltage | 5 … 28 V DC (8 … 28 V DC with 5 V output or loop converter) |
| Power consumption | Typical 3.5 mW, max. 20 mW |
| Analog outputs | 2 channels 0 … 1 / 0 … 2.5 / 0 … 5 / 1 … 5 V DC |
| Digital output | RS-485 2-wire half duplex, Modbus RTU |
| Connector | M8 4-pin male |
| Environment and mechanics | |
| IP rating | IP65 (excluding filter and sensor head) |
| Body | Stainless steel AISI 316 or PC+GF plastic |
| Size / weight | Ø 12 × 78 mm; 20.7 g (metal), 14.1 g (plastic) |
| Compliance | CE, China RoHS, RCM; IEC/EN 61326-1 industrial; FCC part 15 B |
Reviews
There are no reviews yet.